Electronic control products This product is suitable for children with 6 coupons or above. After the assembly/charging of adults is completed, HD will be published. Please use the product under the supervision of adults.

1. Use 13.7 rechargeable remote control during the machine period to use 2 1.5V "AA" non-chargeable appliances to use 2 1.5V "AAA" non-chargeable batteries

2. The polarity and voltage in the battery cell should be operated correctly;

3. Non-rechargeable batteries cannot be recharged

4. The rechargeable battery must be charged under adult supervision

5. The rechargeable battery should be removed from the toy before charging:

6. Different types of batteries or new and old batteries cannot be mixed:

7. The robot dog battery must use the original configuration battery. Shanxi, and use the original USB cable on the machine

8. The battery should be removed from the toy. If it is not used for a long time, please remove the battery in the toy.

9. The power supply terminal must not be short-circuited: 8. Exhausted

10. Use a screwdriver to unscrew the screws on the battery cover of the remote control, install the battery according to the correct positive and negative electrodes, and use a screw machine. Open the screws on the bottom battery cover of the robot dog, and follow the battery plug and the robot dog body power cord.

11. Repair and maintenance: This product is composed of plastic, hardware and electronic components. Check wires and plugs regularly.

2.4G automatic code selection instructions

1. Install the battery of the remote control, short press the remote control switch, the indicator light flashes, turn on the robot dog switch, enter the picture) Please repeat the above operation.

2. Each remote control can only be connected to one robot dog. When the connection is successful, each robot dog will not interfere with each other. Note

3. When the remote control fails to match the code, it will enter sleep after 45 seconds. After matching the code, it will enter sleep after 5 minutes. 4. When you need to pair other remote controls or robot dogs of the same model, you need to press and hold the remote control switch for 2 seconds and turn off the machine.